securiclad-drill-banner

LPS 1175 Security Ratings

Securiclad has achieved Loss Prevention Standard (LPS) 1175 ratings from SR2 to SR4.

The LPS 1175 security ratings are set by the Loss Prevention Certification Board (LPCB), which works closely with the police, Government, insurers, risk consultants and architects to develop its standards.

The LPCB’s standards and approvals for security products are recognised across the globe and it undertakes rigorous technical evaluation work and quality audit processes to ensure the security products it approves deliver proven levels of protection.

During testing, a team of experienced testers use a range of tools, as listed in the categories below, to attack the sample product. As the rating increases, the range of tools tested becomes broader and the time given to the team increases. The testing is extensive and exhaustive.

To reach each rating level, the panel must not be breached up to the maximum test duration set (the entire duration of the test, including time to think, change appliance batteries etc) and the maximum test time set (the amount of time the panel is actually in physical contact with a tool during an attack).

For more information on the LPCB, click here.

For more information on the full testing procedure, click here.

Ratings Explained

LPS 1175 SR1

Product is certified to protect against attacks using bodily force and stealth, with minimal tools.

Test duration: 10 minutes. Test time: 1 minute.

To achieve the LPS 1175 SR1 rating, the product is tested against Category A tools listed below.

Adhesive tape
1 Cable cutter – 150mm long
Fishing line (e.g. polypropylene multi fibre)
Flexible plastic coupon
1 Glass cutter
Hexagon wrenches – selection 120mm long
Hooks, punches, wire, rope
1 Knife – blade 125mm long x 3 mm thick
1 Lever – 0.7kg/300mm long
Pliers (including self-gripping) – selection 200mm long
1 Screwdriver – 6.5mm diameter/square x 150mm long
Spanners – selection 150mm long
Tweezers
Wood/plastic wedges

LPS 1175 SR2

The product is certified to protect against determined opportunistic attacks by bodily physical force using tools with a higher mechanical advantage.

Test duration: 15 minutes. Test time: 3 minutes.

To achieve the LPS 1175 SR2 rating, the product is tested against Category A tools, plus Category B tools listed below:

1 Bolt cutter – 350mm long
1 Claw hammer – 350mm long/0.7kg
1 Drill bit (6mm diameter jobber – HSS/HSCO/Carbide)
1 Hand drill – 400mm long/1.5kg
1 Junior hacksaw plus 2 HSS blades
1 Metal plate shears – 200mm long
1 Multiple slip joint pliers – 250mm long
1 Pipe wrench – 250mm long
Pliers (including self-gripping) – selection 250mm long
1 Screwdriver – 7mm diameter/square x 250mm long
1 Screwdriver – 14mm diameter/square x 400mm long
1 Tube – 38mm diameter x 300mm long

LPS 1175 SR3

The product is certified to protect against deliberate forced entry of well-protected premises using bodily physical force and a wide selection of attack options.

Test duration: 20 minutes. Test time: 5 minutes.

To achieve the LPS 1175 SR3 rating, the product is tested against Category A and B tools, plus Category C tools listed below:

1 Axe – 350mm long/1.5kg
Brick bolsters – 250mm long x 75mm wide blade
Cold chisels – 250mm long x 25mm wide blade
1 Crowbar – 700mm long/2.5kg
1 Drill (cordless with rotary action only)* – 7.2 V DC
1 Drill bit (10mm diameter jobber – HSS/HSCO/Carbide)
1 Gas torch (Butane/Propane)
1 Hacksaw plus 2 HSS blades
1 Hammer – 400mm long/1.5kg
1 Pad saw plus 2 HSS blades
1 Scissor jack – 750kg capacity, 100mm minimum retracted, 200mm stroke
Wood chisels – 250mm long x 25mm wide blade

* All cordless power tools are fully charged with a spare power pack.

LPS 1175 SR4

The product is certified to protect against experienced attempts at forced entry.

Test duration: 30 minutes. Test time: 10 minutes.

To achieve the LPS 1175 SR4 rating, the product is tested against Category A, B and C tools, plus Category D tools listed below:

1 ‘A-tool’ lock puller – 500mm long
1 Bolt cutters – 500mm long
1 Disc grinder (cordless)* – 12 V DC with 3 cutting discs
1 Drill (cordless with rotary action only)* – 12 V DC
5 Drill bits (13mm diameter jobber – HSS/HSCO/Carbide)
1 Felling/fire axe – 850mm long/3 kg
1 General purpose saw
1 Hole saw – 50mm diameter
1 Hooligan bar – 760mm long
1 Jigsaw (cordless)* – 12 V DC with 3 HSS / HSCO / Carbide blades
1 ‘K-tool’ lock remover
1 Plate shears – 300mm long
1 Sledgehammer – 750mm long/3 kg
Steel wedges – 150mm long
1 Tube – 75mm diameter x 500mm long

* All cordless power tools are fully charged during testing, with a spare power pack.

  • CPNI approved
  • Rated to LPS 1175 SR4
  • Can be designed to specification
  • Cost saving due to pre-finish
    – no wet or hot trades
  • Can be retro-fitted
  • Quick order turnaround
  • Completely bespoke
  • bre
  • cpni
    Approved for UK Government use
  • lpcb
    LPS1175 SR3 and SR4
    Modular Security Enclosure
    and Partitioning System
  • ballistics
    European Ballistic Standard
    EN1063 – BR2 (NSR), BR3 (SR),
    BR5 (NSR), BR6 (NSR)